Love is Shock

Number of Performers: 1
inkBoat tech crew: 1 (TD/Lighting Op)
Duration: 60 minutes

The Space: A minimum performance area of 5 meters wide x 5 meters deep x 4 meters high with a level wood floor free from obstacles and obstructions.

Lighting: Presenter must provide the following:
A computerized control board with a minimum of 100 cue memory, ETC control board preferred.
A minimum of 12 dimmers.

Sound: The house sound system should be in stereo and completely free of system hiss and ground hum. Power to the sound system should be clean, with a solid ground and totally separate from the lighting system.

Playback: 2 CD players.

Technical Crew: Presenter must provide 1 lighting/sound operator

8 Hour Load-In: Sound, Set, and Lighting Focus: 1 electrician, 1lighting/sound operator

4-Hour sound and lighting check: 1 lighting/sound operator

On days of subsequent performances, inkBoat must have access to dressing rooms and stage space no less than 2 hours prior to each performance.

3-Hour Strike: 1 stagehand/sound operator, 1 electrician.

 

Onion

Number of Performers: 4
inkBoat tech crew: 1 (TD/Lighting/Sound Op)
Duration: 1 hour

inkBoat will bring in set items such as trap doors to be combined with presenter provided platforms.

The Space: A minimum performance area of 8 meters wide x 8 meters deep x 7 meters high with a level wood floor free from obstacles and obstructions.

Rigging and Soft Goods: Black, back curtains, (8) 4 x 8 platforms
Scaffolding to rise 4 - 6 meters, providing a level space of 1 meter by 2 meters

Lighting: A computerized control board with a minimum of 200 cue memory, ETC control board preferred.
A minimum of 72 dimmers

Sound: The house sound system should be in stereo and completely free of system hiss and ground hum. Power to the sound system should be clean, with a solid ground and totally separate from the lighting system.

The mixing console setup should have a minimum of 16 inputs, ideally w/ 8-bus or 4 solo groups w/ 4 aux/sends and pre + post fader

Microphones:
a. 3 crown pcc mics
b. 1 wireless (uhf) mic
c. 2 akg 451 mics

Playback: 3 CD players

Technical Crew: Presenter must provide 1 electrician, 1rigger/stagehand

2-Day Load-In (8 hours each day): Sound, Set, and Lighting Focus:
1 electrician, 1rigger/stagehand

4-Hour sound and lighting check: 1 electrician

On days of subsequent performances, inkBoat must have access to dressing rooms and stage space no less than 2 hours prior to each performance.

6-Hour Strike: 1 rigger/stagehand, 1 electrician